1,270 W (0.3 W with Standby Mode set to Eco*1, 4

W with Standby Mode set to Normal);
Average power consumption: 913 W (Normal Mode),

782 W (Eco Mode), 531–732 W (Long Life 1 Mode),

477–702 W (Long Life 2 Mode),423–665 W (Long Life 3 Mode)

[Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft),

ICE627087: 2008 Broadcast content, Picture Mode:

Dynamic, Dynamic Contrast Mode: 3]

4,096,000 (2560 x 1600) x 3, total of 12,288,000

pixels when Quad Pixel Drive set to OFF, 49152,000

(12,288,000 x 4) pixels when Quad Pixel Drive set to ON

±59 % (±44 % with the ET-D75LE6, +74 – +84 %

with the ET-D75LE90) (powered)

±29 % (±19 % with the ET-D75LE6, -12 – +16 %

with the ET-D75LE90) (powered)

Vertical: ±40° (±22° with ET-D75LE50, ±28° with

ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)

Keystone correction range

with optional Upgrade Kit ET-UK20*6

Vertical: ±45° (±40° with ET-D75LE10/D75LE20, ±22°

with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90),

horizontal: ±40° (±15° with ET-D75LE6/D75LE10/D75LE50,

±20° with ET-D75LE20, ±25° with ET-D75LE30, ±30°

with ET-D75LE40, ±40° with ET-D75LE8, 0° with ET-D75LE90),

Up to a total of ±30° during simultaneous

horizontal and vertical correction.

578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝)

(optional lens, legs and lens cover not included);

578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝)

(Including legs at shortest position and protruding parts)

Logo Transfer Software,
Multi Monitoring & Control Software,
Early Warning Software,
Geometry Manager Pro (ET-UK20 Upgrade Kit and

ET-CUK10 Auto Screen Adjustment Kit)

*1 When Standby Mode is set to Eco, network functions

such as power on over LAN will not operate. Additionally,

only certain commands can be received for external

control using the serial terminal.

*2 Refresh rate varies depending on scanning frequency.

*3 At this time the brightness will have decreased to

approximately half of its original level. Light source

lifetime may be reduced depending on environmental conditions.

*4 Measurement, measuring conditions, and method of

notation all comply with ISO 21118 international standards.

*5 Optical axis shift function cannot be operated when

used with the ET-D75LE50.

*6 Range varies depending on mounted lens.

*7 Average value. May differ depending on the actual unit.

*8 When the operating mode is set to Normal, the

operating temperature range is 0 °C (32 °F) to 45 °C (113 °F),

and the operating temperature range is 0 °C (32 °F) to 40 °C

(104 °F) when used in locations from 1,400 m to 4,200 m

(4,593 ft to 13,780 ft) above sea level. When the operating

mode is set to Eco or Long Life 1/2/3, the operating

temperature range is 0 °C (32 °F) to 40 °C (104 °F).

When used with Smoke Cut Filter, the operating temperature

range is 0 °C (32 °F) to 35 °C (95 °F). Furthermore, the projector

cannot be used in locations over 2,700 m (8,858 ft) with the

operating mode set to Eco or Long Life 1/2/3. When used

with Smoke Cut Filter, the projector cannot be used in

locations over 1,400 m (4,593 ft). The brightness of the

light source may drop depending on operating

environment and the operating temperature range in order to protect the projector.