| Projector type | 3-Chip DLP™ projector |
| DLP™ chip | |
| Panel size | 24.4 mm (0.96 in) diagonal (16:10 aspect ratio) |
| Display method | DLP™ chip x 3, DLP™ projection system |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) x 3 |
| Light source | Laser diodes (Blue LD, Red LD) |
| Light output | 30,000 lm*1/31,000 lm (Center)*2 |
| Time until light output declines to 50 %*3 | 20,000 hours (NORMAL) |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) |
| Contrast ratio | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| Screen size [diagonal] |
1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95 |
| Center-to-corner zone ratio*1 | 90 % |
| Lens | Optional (no lens included with this model) |
| Lens shift*4 (From the origin point of the lens mounter) | |
| Vertical |
±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered) |
| Horizontal |
±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered) |
| Keystone correction range |
Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D75LE50/ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95). are used simultaneously, correction cannot be made exceeding a total of 55 °. |
| Installation | Ceiling/floor, front/rear, free 360-degree installation |
| Terminals | |
| SDI IN | — |
| HDMI® IN | HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) |
| DVI-D IN | — |
| MULTI PROJECTOR SYNC IN | BNC x 1 |
| MULTI PROJECTOR SYNC OUT | BNC x 1 |
| MULTI PROJECTOR SYNC IN/3D SYNC IN/OUT | — |
| MULTI PROJECTOR SYNC OUT/3D SYNC OUT | — |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
| DIGITAL LINK |
RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 |
| LAN |
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
| USB |
USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick |
| DC OUT | USB Type A x 2 (for power supply, DC 5 V total of 2 A) |
| Expansion slot |
SLOT 1/SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible |
| Power supply |
AC 200 V–240 V (Light output will decrease to approximately one third when using the projector with AC 100 V to AC 120 V) |
| Power consumption | TBD |
| Cabinet materials | Molded plastic |
| Operation noise*1 | TBD |
| Dimensions (W x H x D) |
600 x 360 x 800 mm (23 5/8˝ x 14 3/16˝ x 31 1/2˝ ) or less, not including protruding parts*6 |
| Weight*7 | 70 kg (154 lbs) or less*8 |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F), operating humidity: TBD |
| Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™ |